Sanitary Stainless Steel Beer Sampling Valve

Sampling valve is mainly applied to extract sample from tank or pipeline. It also can be assembled at the bottom of the tank or pipeline to drain away the remains.
Model:
Contact Now
Sanitary Stainless Steel Beer Sampling Valve

Application

Sanitary stainless steel beer sampling valve is mainly applied to extract sample from tank or pipeline. It also can be assembled at the bottom of the tank or pipeline to drain away the remains.

The valves come with a variety of valve bodies and heads that fit most situation. The bodies come with welded or clamp connection, the heads come with pnueumatic or manual operations and PTFE membrane.

Introduction

This type of valves is used to obtain a sample of the medium in a pipe or equipment for the occasion of frequent chemical analysis. Sampling valve using the insulation jacket, but also should not be forced to open the valve, if the valve can not be opened, should not use the extension arm, which will cause the valve force is too large and lead to spool and stem off, Or lead to damage to the sampling parts, resulting in security risks. In the course of the use of the sampling valve, if you encounter the need to use the case of insulation jacket, it should be noted that the operation can not be completely melted in the media before the forced opening of the valve, the valve must wait until the crystal melt to open the valve, otherwise likely to cause Safety accident.

Technical Specification

Connection thread,clamp or weld
Min.Pressure Vaccum
Max.Pressure 10bar 145PSI
Available Temprature -10°C to +120°C
Material SS304/SS316L
Seal PTFE,SILICON or EPDM
Feedback